Festo CPX-FB11 - Page 85

2. Commissioning
2−39
Festo P.BE−CPX−FB11−EN en 0503b
The physical output data are transmitted with the communi
cation connection Polled" or Change of State". In this
example Polled":
Fig.2/16: Address assignment of the output
(example 2, mod. EDS)
Load the configuration into the scanner
Finally, load the configuration data into the scanner. Further
information can be found in the documentation for the
scanner.
Example: scanner 1747−SDN (SLC 500 series)
Addressing for example terminal 2 (CPX terminal with
CPInterface, see Fig.2/2) with:
6 input bytes, input address as from I1.1.0
20 output bytes, output address as from O1.1.0