FiberHome AN5506-04-FS User Manual

4
Web Configuration Guide
Figure
4.39 Port Triggering
2
. Configure parameters relevant to port triggering according to
the requirement. Table 4.21 describes the parameters.
3. Click Apply to apply and save the configuration.
T
able 4.21 Parameters for Port Triggering
Item Description
WAN
The corresponding WAN connection bound with the port
triggering rule.
Description The port triggering rule name.
Trigger Port
The range of destination port for the port triggering data
packets. If only one port exists, enter the same port
number.
Trigger Protocol
The protocol type for the port triggering data packets. The
options include ALL, TCP and UDP.
Open Port
The range of destination port for the opened data packets.
If only one port exists, enter the same port number.
Enable Enables or disables the rule.
115

FiberHome AN5506-04-FS Specifications

General

Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Wi-Fi	2.4 GHz
PON Interface	GPON
Ports	4 x 10/100/1000 Mbps Ethernet, 2 x POTS