3.14.1 Play mode
The default playback mode is sequential playback. After the current list is played, the song will stop playing. (If “folder
skip” is ON, it will jump to the next list to continue playing until the last list of songs is played. Short press the confirmation
button to switch to:
Loop play: The song will play in the list all the time;
Single loop: The song will play the current song all the time (you can also switch other songs manually);
Single play: stop playing after the current song is played;
Shuffle: The song will play randomly in the current list.
3.14.2 Resume mode
The default is off. At this time, after the shutdown and restart in the playback state, the system will enter the main
page and will not automatically play the song before shutdown.
Song: Press the power button to turn off the camera during playback. After turning it on again, it will automatically
start playing the song played when the previous shutdown, and the song will start playing from the beginning;
Position: Press the power button to turn off the camera during playback. When it is turned on again, it will
automatically start playing the song played when the previous shutdown, and the song will continue to play from the
progress of the playback.
3.14.3 Playback gap
The default is off. At this time, the song will be switched according to the system default mode, and the song will not
be specially processed. Short press the confirmation button to switch to:
Seamless: In the same format, the same sampling, the same deep song, when the system automatically switches
songs, the song can be specially seamlessly connected, so that the sound is consistent without interruption of song
switching (some formats such as MP3 cannot be switched seamlessly).
3.14.4 Max volume
This function is to limit the maximum output volume. When this parameter is changed, the volume of the song
played by this unit cannot be adjusted beyond the set value. The value can be adjusted to any value from 20 to 60.
3.14.5 Fixed volume setting
The default is off. At this time, the volume before the shutdown will be memorized every time the power is turned off.
You could short press to turn on switch. Each time you turn it on, the volume will be the value of the “Power On Volume
Customization” setting.
3.14.6 Balance
Short press to enter the channel balance adjustment page, you can adjust the balance by touch bar or press the
previous/next button.
3.14.7 Equalizer
The default is off. At this time, the song output is the native output, and the system does not perform additional
processing on the song sound. Click and enter the equalizer page. You can switch between different preset equalizers and
listen to different effect sounds.
3.14.8 Play through folder
To Next Page
Loading...
