Fiio M5 - Indicator Display

The status bar is as shown above:
①Home: Click to return home page
②Clock: Time display
③Line out: Output is set to LO
④Step counter on: Step counter has been turned on
⑤Coaxial out: Output is set to SPDIF
⑥Headphone out: Output is set to PO
⑦Sleep on: Sleep has been turned on
⑧Bluetooth codec format as Bluetooth transmitter：M5 has connected to Bluetooth headphone, Bluetooth codec
format is SBC
⑨Bluetooth codec format as Bluetooth transmitter：M5 has connected to Bluetooth headphone, Bluetooth codec
format is APTX
⑩Bluetooth codec format as Bluetooth transmitter：M5 has connected to Bluetooth headphone, Bluetooth codec
format is LDAC
⑪Bluetooth codec format as Bluetooth transmitter：Bluetooth transmitter option is on and the M5 hasn't connected
to Bluetooth headphone
⑫Play status: Current playback status is 'play'
⑬Play status: Current playback status is 'pause'
⑭Volume: Current volume value
⑮Battery: Current battery level icon
(Note: Some icons need to be displayed in the corresponding state, and the icons displayed in different states may
not be the same)
3.5 Indicator display
The indicator only lights up at Bluetooth receiving mode, it won't light up at non-Bluetooth receiving mode.
1. Status indicator display (when not playing)
Status
Blue light
Red light
Low battery
Off
Indicates the current working status
Connected
Flashes every 3 seconds
Off
Charging
Indicates the current working status
Off
Charging
completed
indicates the current working status
off