(Note: 1 Sleep standby is invalid during recording and computer data connection;
2 In the case of connecting USB charging, the sleep standby time will enter the shutdown charging interface;
3 After the sleep standby is turned on, the status bar has a corresponding icon indication;
4 Sleep standby is the same as power-saving standby. The difference is that the two conditions are different, and the sleep
standby is only valid once, when the player restarts or the player enters standby (including power-saving standby and sleep
standby). The sleep standby is automatically switched to the off state.
3.15.5 USB mode
Select the USB mode between the storage and DAC modes. When the storage mode is selected, the data can be
connected to the computer for data transmission. When the DAC mode is selected, the M5 can be connected to the
computer through the data cable to perform audio decoding as an external sound card.
(Note: windows7/8/10 32bit or 64bit system need to go to the official website to download and install the driver, the driver
package has detailed installation instructions; OSX system does not need to install the driver, set to DAC mode and connect
to the computer to identify; windows xp system only storage is supported, USB DAC is not supported)
3.15.6 Recording quality
This item is used to select the type of recording save file. When “Low” is selected, the recording file will be saved in
the Micro SD card in MP3 format. When “High” is selected, the recording will be saved in WAVE format.
3.15.7 Lock screen clock
Lock screen clock is turned on: when the machine reaches the backlight time setting value or manually press the
power button to lock the screen (off the screen), and then press the power button to wake up, it will enter the lock screen
clock interface first.
Lock screen clock is turned off: when the player lock screen (off screen) wakes up, it will directly enter the system
interface, and the lock screen clock interface will no longer be displayed.
3.15.8 Clock face
This item is used to select and set the display effect of clock page of lock screen. There are 5 options in total.
You can choose different clock face according to your needs.
3.15.9 Slect output
Since the 3.5mm port of M5 supports three output modes, PO, LO and SPDIF, this option is to select the desired output.
When selecting PO, the output mode is headphone out, and the volume adjustable; when selecting LO, the output mode is
lineout, the volume is not adjustable and fixed to maximum. Please do not directly connect to the headphone at that time
(LO port is used for connecting amplifier or speaker). When selecting SPDIF, the output mode is coaxial out, which can be
connected to other DAC that support coaxial decoding.
3.15.10 SPDIF output
This option is used to set the SPDIF output mode when playing DSD files. The default option is DOP and you could switch
to D2P.
3.15.11 display direction
To Next Page
Loading...
