4. Operating description of turret punch press
The turret punch press is constructed for processing of sheet material. Tools for punching are located
on the turret. Sheets are processed by punching them with a punch and die. In the process the sheet
is moved according to NC control commands. Punching can be executed as a single stroke or a stroke
sequence (nibbling or cutting out).
The machine is constructed to be suited to its purpose of use and to be operated, adjusted and
serviced without exposing people to danger as far as the operations in question are performed in the
way the manufacturer has intended and in accordance with the manufacturer's instructions.
4.1. Misuse of the machine
The machine must not be used for any other purpose than for processing of sheet material. The
operating values specified in the technical data must not be exceeded. Neither the application, the
construction or any part thereof must be changed nor any auxiliary equipment added without a written
consent from the manufacturer.
User Guide - E5 Turret Punch Press
16 (46)
To Next Page
Loading...