Finn-Power E5x - Safety During Operation and Maintenance

2.3. Safety during operation and maintenance
WARNING
The machine must not be taken in production use before it has
been installed according to the layout and tested and handed
over to the customer according to the delivery contract.
2.3.1. Operation stations and safety zones
• During operation, the operator is normally stationed at the control panel / control desk.
• The machine's working area is surrounded by a safety zone.
• The safety zone is separated by fixed structures, safety fences and safety devices.
• The machine may be left running in automatic mode.
• During machine operation no one, including the operator, is allowed within the safety zone.
WARNING
• Do not store goods or products in the safety zone.
• Crushing hazard; the working movements of the machine and
the machined part present a serious risk of accident
• When starting the machine, always ensure that no people nor
foreign objects are within the safety zone.
User Guide - E5 Turret Punch Press
7 (46)