Operational Modes
14
411 Communicator Document #50921 Rev. E 12/09/2008 P/N 50921:E
1.7 Operational Modes
1.7.1 Normal Mode
Normal Mode is the standard mode of operation in which the 411 digital communicator monitors the host control
panel status as well as telephone line voltage and other internal circuits. In addition to locally annunciating commu-
nication fail, the digital communicator transmits system status information to UL listed central station receivers.
Transmitted data includes fire alarm, fire alarm trouble, supervisory alarm and AC loss information. Specific digital
communicator troubles are also transmitted.
1.7.2 Real Time Clock Mode
Real Time Clock Mode allows the user to change the digital communicator’s internal 24 hour clock. Connecting an
external Programmer allows access to the various Modes of operation. While the communicator is in Real Time
Clock Mode, it does not monitor channel inputs.
1.7.3 Program Mode
Program Mode is used to change the programmed functions of the 411 digital communicator. While the communica-
tor is in Program Mode, it does not monitor channel inputs.
1.7.4 Troubleshoot Mode
Troubleshoot Mode may be used for testing the telephone line interconnect wiring. Connection from the 411’s mod-
ular jacks, through the RJ31X jacks and into the telephone network may be easily checked. In this mode, the Pro-
grammer keypad acts similar to a telephone touchpad. While the communicator is in Troubleshoot Mode, it does not
monitor channel inputs.
1.7.5 Default Mode
Default Mode may be used to return all 411 programming back to the factory default settings.
To Next Page
Loading...
