411 Communicator Document #50921 Rev. E 12/09/2008 P/N 50921:E 45
Programming Sheets
75
76
77
Input Channel 3 Delay Timer. Enter 0 - 179 seconds delay. Factory default is '000' for no
delay. Does not delay Input Channels programmed for fire functions.
78
79
80
Future use.
81
Touchtone/Rotary Select for Primary Phone. Enter '0' for touchtone dialing; '1' for rotary dialing.
82
Make/Break Ratio for Primary Phone. Enter '0' for 67/33 ratio; '1' for 62/38 ratio.
83
Touchtone/Rotary Select for Secondary Phone. Enter '0' for touchtone dialing; '1' for rotary dialing.
84
Make/Break Ratio for Secondary Phone. Enter '0' for 67/33 ratio; '1' for 62/38 ratio.
85
Future use.
86
Future use.
87
Output Relay Enable. Enter ‘0’ to disable relay; ‘1’ to enable relay.
88
Output Relay Function Selection. Enter '0' for activation on fire alarm; '1' for host control panel trouble; '2'
for fire supervisory; '4' for AC loss; '6' for communication failure; '7' for DACT trouble.
89
Trouble Call Limit. Enter a '0' to disable this feature; '1' to enable Trouble Call Limit. Factory default is '0' for
disabled.
90
91
92
93
Future Use.
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
Future use.
114
115
Future use.
116
Future use.
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
Future use
.
137
Future use.
To Next Page
Loading...
