To Next PageTo Next PageWhat to do if my FISCHBEIN Tools machine is no longer running?
If your FISCHBEIN Tools machine isn't running, first ensure the plug is securely in position and that the power cord is not broken. Check the motor brushes to see if they are of adequate length. Also, pull on the switch; if you hear a 'click', do not change the switch.
Why is the thread breaking on my FISCHBEIN F Tools?
If you are experiencing thread breakage with your FISCHBEIN Tools, check if the thread is unrolling properly and ensure the thread tension is correct. Make sure the thread isn't blocked by the thread guides and consider whether the needle is too hot. Using oiled thread may also help. If problems persist, call your Fischbein specialist.
What to do if my FISCHBEIN F Tools machine is missing stitches?
If your FISCHBEIN Tools machine isn't providing a thread chain or is missing stitches, start by checking the thread path and thread tension. Verify that the presser foot is still passing along the plate and check if the feed dog is worn out. Also, ensure the needle is well fixed on the machine and inspect the looper for any damage or wear. Finally, review the machine's adjustment settings.
How to fix a stitch that is too loose on my FISCHBEIN Tools?
If the stitch is too loose on your FISCHBEIN Tools, recheck the thread tension and adjust the thread between the tension discs.
General