FISCHBEINCOMPANY
The Leader in Bag Closing Technology
REF : 14810F-GB
ED.A10/2001
6
SERVICE .
Should your machine require factory service or maintenance
please contact any of the Fischbein authorized distributors or
Fischbein Brussels . Return the warranty card with details concerning your
problems for warranty justification .
They can also give you the best advice on utilization ,oil ,thread and
spare parts .
RECOMMENDATIONS FOR MAX. PERFORMANCE .
Work area.
The MODEL F machine should be operated in an area that allows freedom
of motion for the operator and the unit. The machine’s input end at the feed
dog works quickly and the output end near the thread knife is very sharp.
Other operators should keep out of arm’s reach from the area in which the
machine works. Operators should always wear proper eye protection when
operating the machine and not wear loose clothing or jewelry. Long hair
should be pulled back and tied to avoid getting caught in the machine.
Before you start the machine .
1. Make sure your machine is well connected to an adequate power
supply as indicated on the motor.
The motor is double insulated , so there is no grounding required .
2. Verify that all guards are in place .
3. No special installation is required , but we may recommend you to
place something on the ground to set the machine on when not in use.
4. The machine is shipped to you with some examples of sewn test strips
Examine these carefully to see how proper chain form should look.
5. Use of the Fischbein model 1550 suspension and balancing unit is
recommended. This will allow the machine to be suspended at any
convenient height , ready for use .
6. You may want to try the machine on some empty bags or pieces of
paper to get a feel of how to use it , before you start with filled bags .
To Next Page
Loading...
