FISCHBEINCOMPANY
The Leader in Bag Closing Technology
REF : 14810F-GB
ED.A10/2001
7
As you sew with the Fischbein model F .
1. Do not use the machine in very humid environment.
2. Machine mechanism will carry the bag automatically through;
therefore do not either pull , push , or turn the machine .
3. Keep hands and fingers away from the bag moving mechanisms.
( feed dog , presser foot )
4. Only use the machine to close bags of specific thickness. It is not
desined for clothing or very thin plastic bags , (see page 3 , machine
specifications) .
5. A minimum of paper bag strength is required. For plastic bags, a
minimal thickness of 120 µ ( microns ) is necessary , depending on
quality of PE used .
Maintenance .
1. Always use genuine Fischbein parts .
2. Do not use screws other than those indicated in the parts list .
Hardware items on the Fischbein model F systems are not metric .
3. Always use original Fischbein D5 needles .
4. Use a 20 / 4 Fischbein 100 % polyester thread to get the best results .
5. Fischbein Premium Thread ( N° 25010.. ) is an excellent product ,and
available in various colors . With a full 200 gr cone you will sew
around 250 bags ( depending of bag widthness ) .
6. We also recommend that you use other Fischbein products such as :
cleaning agents and crepe paper ( tape ) ; these products were
selected to avoid problems and allow the for maximum efficiency of
the machine .
7. Proper settings for all internal components are made at the factory ,
any change to these settings could cause damage to the machine
mechanism .
To Next Page
Loading...
