FISCHBEINCOMPANY
The Leader in Bag Closing Technology
REF : 14810F-GB
ED.A10/2001
28
TROUBLE - SHOOTING LIST .
1. Stitch is too loose . 1. Recheck thread tension .
2. Adjust thread between the tension
discs , 11114 .
2. Stitch is too short . 1. Eventually replace feed dog , 11203 .
3. The bag is tearing up at the
sewing line .
1. Do not hold the machine during the
sewing operation of the bag .
2. Is there still good transportation of
the bag ?
3. Is there enough pressure on the presser
foot , 11400 ?
4. Has the bag quality been changed ?
4. Machine is no longer
running !
1. Is the plug secure in position ?
2. Is the power cord broken or still , ok ?
3. Pull on switch , and if you hear a
“click” do not change switch , 12500 .
4. Check motor brushes for adequate
length .
5. Thread breakage . 1. Is thread unrolling properly ?
2. Check thread tension .
3. Is thread blocking thread guides ?
4. The needle is too hot !
5. Use oiled thread . (pay attention to
oil quality )
6. Call your Fischbein specialist .
6. Machine is not providing a
thread chain at the end of
the bag or is missing
stitches .
1. Check thread path .
2. Check thread tension .
3. Is the presser foot 11400 still passing
along the plate 11210 ?
4. Is the feed dog 11203 worn out ?
5. Is needle well fixed on the machine ?
6. Is looper 11300 affected or worn out ?
7. Look at the adjustment of the machine.
If problems still occur call your Fischbein specialist or Fischbein brussels .
To Next Page
Loading...
