FISCHBEINCOMPANY
The Leader in Bag Closing Technology
REF : 14810F-GB
ED.A10/2001
9
HOW TO HANDLE A BAG BEFORE CLOSING IT ?
Fig 1 : When the bag is filled in and ready
to be closed , you must manually
reform the bag top including the
recommended gussets .
Fig 2 : After reforming operation , fold
the bag top as close as possible
to the product and than bring
the bag in its original vertical
position as shown on
Fig : 2 and 3 .
Fig 3 : You can now start the closing
operation remembering to leave
sufficient free space between the
top of the product and the sewing
line .
Fig : 4 When handling a jute bag with
thick bag edges , do not intro -
duce this edge directly into the
mechanism but shift the edge
gently before introduction and
starting the closing operation .
To Next Page
Loading...
