Fisher & Paykel SmartDrive - 2 SPECIFICATIONS; 2.5 Wash Motor

421827
7
2 SPECIFICATIONS
2.1 Dimensions
Compact Washer Medium Washer Large Washer
Height to lid
Open 1320mm – 1350 mm 1360mm – 1390 mm 1410mm – 1440mm
Closed 950 mm – 980 mm 950 mm – 980 mm 950mm – 980mm
Height to console 1010 mm – 1050 mm 1010 mm – 1050 mm 1010mm – 1050mm
Width 560 mm 600 mm 650mm
Depth 560 mm 600 mm 650mm
Inlet hose length 1200 mm 1200 mm 1200mm
Packed weight 50.4 kg 55.3 kg 60.5
Unpacked weight 43.5 kg 47.7kg 52.0
Note: Exact height of the machine is dependent on how far the feet are inserted into the
base of the machine.
2.2 Maximum Capacity (Full Load)
Compact Washer Medium Washer Large Washer
Dry Weight 5.5kg 7kg 8kg
2.3 Water Consumption
*Note: Approximate consumption for a high water level load for each rinse option offered.
Compact Washer Medium Washer Large Washer
Full (High) 65 litres 75 litres 90 litres
Spray & Deep Rinse 130 litres 150 litres 175 litres
Save Water 110 litres 130 litres 150 litres
Eco Rinse 73 litres 90 litres 105 litres
1 Deep Rinse 120 litres 140 litres 165 litres
2 Deep Rinse 160 litres 190 litres 215 litres
2.4 Water Fill Temperature (Approximate Factory Settings)
MW Washer GW Washer
Supply Water Fill Temp Supply Water Fill Temp
Hot Supply temperature Hot 60
o
C
Warm 36 - 38
o
C* Hot / Warm 50
o
C
Cold Supply temperature Warm 40
o
C
Warm / Cold 35
o
C
Cold Plus 20
o
C
Cold Supply temperature
Recommended hot water inlet temperature 70
o
C (Max)
2.5 Wash Motor
Electronically commutated 36 pole direct drive 3 Phase brushless DC motor.
Motor Resistance: 19.5Ω +/- 10% @ 20
o
C (39Ω +/- 3.95Ω across any two phases)