Fisher Scientific Accumet Basic AB30 - Program 3: Select Conductivity Mode; Program 4: Select Resistivity Mode; Program 5: Select TDS Mode

5.1.4 Program 3: Select the conductivity mode
Press enter to accept this choice of measuring conductivity and
return to the measure screen or press setup again to go to the
next page.
µS
5.1.5 Program 4: Select resistivity mode
Press enter to accept this choice of measuring resistivity and
return to the measure screen or press setup again to go to the
next page.
Ωohm
5.1.6 Program 5: Select the TDS mode
Press enter to accept this choice of measuring TDS and return to
measure screen or press setup again to go to next page.
TDS