Fisher FIELDVUE DVC6200 User Manual

Instruction Manual
D103409X012
Index
May 2013
145
Integral Setting, 55
Integrator Saturation, 68
ISA Standard 7.0.01, 28
J
jumper, 41
K
KGS, hazardous area approvals, 7
L
Lag Time, 60
Lead/Lag, 60
Lead/Lag Time, 60
Lightning and Surge Protection, 6
Loop Connections, 4-20 mA, 31
Loop Current Validation Enable, 62
M
Magnet Assemblies, 13
Magnetic Feedback Assembly, replacing, 98
Magnetic Tools, use of, 12, 17
Magnets, high power, 12, 17
Maintenance
Gauges, Pipe Plugs, or Tire Valves, 105
I/P Converter, 101
module base, 98
Pneumatic Relay, 105
Printed Wiring Board Assembly, 103
Terminal Box, 106
tools required, 98
Manual Calibration, 79
Manufacturer, actuator, 71
Maximum Cable Capacitance, 37
maximum supply pressure, 70
Maximum Temperature, Device Record, 90
Message, 69
Minimum Temperature, Device Record, 90
Mode, 49
Burst, 49
Control, 49
Instrument, 41
Restart Control, 49
Module Base
removing, 99
replacing, 100
Module Base Maintenance, 98
Mounting
67CFR Regulator, 26
DVC6205 base unit
Pipestand, 14
Wall, 14
DVC6215 feedback unit, 16
the DVC6200, 11
Mounting Instructions, 14
N
natural gas, as supply medium, 27, 97
Natural Gas Certified, Single Seal device, 28
Other Classfications/Certifications, 7
NEPSI, hazardous area approvals, 7
O
Output Pressure Sensor, Calibration, 81
Output Signal, 6
Overview, Device, 93
P
Partial Stroke, 73
Partial Stroke Test (ODV only), 91
Auxiliary Terminal, 91
Digital Valve Controller, 91
Field Communicator, 92
Parts
Kits, 113
List, 114
ordering, 113
Performance Tuner, 44
PESO CCOE, hazardous area approvals, 7
Pipe Plugs, maintenance, 105

Fisher FIELDVUE DVC6200 Specifications

General

Type	Digital Valve Controller
Operating Temperature Range	-40 to 85 °C (-40 to 185 °F)
Enclosure Rating	NEMA 4X, IP66
Input Signal	4-20 mA, HART
Communication Protocol	HART
Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Diagnostics	Valve signature
Approvals	ATEX, IECEx, FM, CSA
Power Supply	Loop powered