Instruction Manual
D103409X012
Detailed Setup
May 2013
52
Table 4‐2. Conditions for Modifying FIELDVUE DVC6200 Digital Valve Controller Parameters (continued)
Parameters
In Service/
Config Protected
In Service/
Config Unprotected
Out of Service/
Config Protected
Out of Service/
Config Unprotected
Tvl Dev Alrt Enab
Tvl Dev Alrt Pt
Tvl Dev Time
n
n
n
n
n
n
n
n
n
n
n
n
Cycl Cnt Alrt Enab
Cycl Count Alrt Pt
Cycl Count DB
Cycl Count
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Tvl Acum Alrt Enab
Tvl Acum Alrt Pt
Tvl Acum DB
Tvl Acum
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Aux Terminal Action
Aux In Alrt Enab
Aux In Alrt State
Drive Alrt Enab
Supply Press Alrt
‐ ‐ ‐
n
n
n
n
‐ ‐ ‐
n
n
n
n
‐ ‐ ‐
n
n
n
n
n
n
n
n
n
Flash ROM Fail
Ref Voltage Fail
Drive Current Fail
Critical NVM Fail
Temp Sensor Fail
Press Sensor Fail
Tvl Sensor Fail
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
n
n
n
n
n
n
n
n—indicates parameter may be modified for instrument mode and protection shown.
Response Control
Field Communicator Configure > Detailed Setup > Response Control (1‐2‐2)
Follow the prompts on the Field Communicator display to configure the following response control parameters:
Tuning, Travel/Pressure Control, Input Characterization, Custom Characterization Table, and Dynamic Response.
Tuning
Field Communicator Configure > Detailed Setup > Response Control > Tuning (1‐2‐2‐1)
Travel Tuning
WARNING
Changes to the tuning set may cause the valve/actuator assembly to stroke. To avoid personal injury and property damage
caused by moving parts, keep hands, tools, and other objects away from the valve/actuator assembly.
D Travel Tuning Set—There are eleven tuning sets to choose from. Each tuning set provides a preselected value for the
digital valve controller gain settings. Tuning set C provides the slowest response and M provides the fastest
response.
Table 4‐3 lists the proportional gain, velocity gain and minor loop feedback gain values for preselected tuning sets.