Lit. No. 44224, Rev. 14 101 August 15, 2011
WARNING
To prevent accidental movement of
the blade, always turn the control OFF
whenever the snowplow is not in use. The
power indicator light will turn OFF.
Air Removal – XtremeV™ Blades
11. Turn the control ON and completely extend
and retract the driver-side wing several times.
With all rams fully retracted, turn the control
OFF.
12. Fill the reservoir to the top of the fi ll hole and
replace the fi ll plug.
NOTE: Loosen fi ll plug slowly to relieve any
pressure in the reservoir.
13. Repeat Steps 11 and 12 for the passenger-
side wing.
14. HT Series™ Blades: Fill the reservoir to
within 2-1/2" from the top of the fi ll hole and
replace the fi ll plug.
All other Straight Blades: Fill the reservoir to
the top of the fi ll hole and replace the fi ll plug.
MAINTENANCE
To Next Page
Loading...