Lit. No. 44224, Rev. 14 106 August 15, 2011
MAINTENANCE
If a problem should occur and fuse replacement
is necessary, the replacement fuse must be of the
same type and amperage rating as the original.
Installing a fuse with a higher rating can damage
the system and could start a fi re.
VEHICLE
The snowplow operating vehicle shall be
maintained according to manufacturer's
recommendations. Tire pressure shall be
maintained according to manufacturer's
recommendation.
RECYCLE
When your snowplow has performed its useful life,
the majority of its components can be recycled
as steel or aluminum. Hydraulic fl uid shall be
disposed according to local regulations. Balance
of parts made of plastic shall be disposed of in a
customary manner.
EMERGENCY PARTS/TOOLS
• 2 – 10" Adjustable Wrenches
• 1 – Medium Flat Blade Screwdriver
• 1 – Pair of Common Pliers
• 1 – #20 & #30 TORX
®
Drivers
• Automotive Blade-Style Fuses (See applicable
Harness Diagram for the correct fuse ratings
for your snowplow.)
• 4-Amp Automotive Blade-Style Mini Fuses
• Funnel
• 12V DC Test Light
• Flashlight
• 1/8" & 3/16" Allen Wrenches
• 1/4" Ratchet, 6" Extension, 1/4" &
5/16" Sockets
• Electrical Tape
• Small Pencil Magnet
• 1 – Quart FISHER
®
EZ Flow Hydraulic Fluid
To Next Page
Loading...