Lit. No. 44224, Rev. 14 21 August 15, 2011
GETTING TO KNOW YOUR SNOWPLOW
XtremeV™ T-Frame/Push Assembly
The T-frame is designed with a connecting
assembly that provides optimum strength to
weight ratio and adjustment for variations in
vehicle height. The feature ensures that blade
edges can be parallel to the road surface when
plowing. The diagonal brace holds the top of the
hinge pin and the blade vertical.
HEADGEAR
The headgear assembly is composed of the
headgear, linkage mechanism, lift arm and jack.
The headgear is connected to the pushplates,
which are mounted directly to the vehicle frame.
The headgear also provides the mounting
framework for the FISHER
®
Insta-Act
®
hydraulic
unit and the lift arm. The lift ram raises and lowers
the blade by moving the lift arm and lift chain. The
jack, when lowered, supports the snowplow during
and after its removal from the vehicle.
A-FRAME/T-FRAME
Straight Blade & HT Series™ A-Frame
The A-frame is attached to the blade assembly
with a centered pivot pin (HT Series A-frames
use a center screw). The pivot pin allows the
blade assembly to angle left or right 28 degrees,
providing excellent snow displacement. The heavy
1" pivot pin is shear-proof under normal operation,
assuring a solid connection.
XLS™ A-Frame
The A-frame is attached to the blade assembly
with a centered pivot pin. The pivot pin allows the
blade assembly to angle left or right 25 degrees,
providing excellent snow displacement. The heavy
1" pivot pin is shear-proof under normal operation,
assuring a solid connection.
To Next Page
Loading...