Lit. No. 44224, Rev. 14 72 August 15, 2011
OPERATING YOUR SNOWPLOW
The quill in the valve manifold adjusts the blade
drop speed.
1. Lower the blade to the ground before making
the adjustment.
2. To access the quill on the XtremeV™ and
XLS™ hydraulic units: raise the top cover
retainer, remove the bottom cover retainer and
remove the rear cover.
Straight Blades XtremeV™ Blades
Quill
XLS™ Blades
Top
Cover
Retainer
Bottom
Cover
Retainer
Quill
Quill
HT Series™ Blades
BLADE DROP SPEED ADJUSTMENT
WARNING
Keep 8' clear of the blade drop zone when
it is being raised, lowered or angled. Do
not stand between the vehicle and blade
or directly in front of blade. If the blade
hits you or drops on you, you could be
seriously injured.
To Next Page
Loading...