EasyManua.ls Logo

Fisher Minute Mount 2 system - Snowplow Headlamp Check

Fisher Minute Mount 2 system
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lit. No. 44224, Rev. 14 67 August 15, 2011
OPERATING YOUR SNOWPLOW
SNOWPLOW HEADLAMP CHECK
With all electrical plugs connected, check the
operation of vehicle and snowplow headlamps.
Lights Results
Parking Lamps
Both vehicle and snowplow
lamps should be ON.
Right Turn Signal
Both vehicle and snowplow
lamps should be ON.
Left Turn Signal
Both vehicle and snowplow
lamps should be ON.
Connecting and disconnecting the electrical plugs
should switch between the vehicle and snowplow
headlamps as follows:
Electrical plugs DISCONNECTED – Vehicle
headlamps function normally.
Electrical plugs CONNECTED – Vehicle
headlamp functions transfer to the snowplow
headlamps. On some DRL systems, both the
vehicle and snowplow headlamps will function.
Aiming the Headlamps
Aim the snowplow headlamps with the
snowplow mounted and raised in the transport
position. See Aiming Headlamp Beams in the
Maintenance section for instructions.
Aim the vehicle headlamps with the snowplow
removed from the vehicle.

Table of Contents

Related product manuals