Lit. No. 44224, Rev. 14 39 August 15, 2011
STRAIGHT BLADE
STRAIGHT BLADE
JOYSTICK SOLENOID CONTROL
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position.
OPERATING YOUR SNOWPLOW
WARNING
To prevent accidental movement of the
blade, always move the ON/OFF switch to
OFF whenever the snowplow is not in use.
The power indicator light will turn OFF.
CAUTION
DO NOT hold control lever in RAISE,
ANGLE LEFT or ANGLE RIGHT position
after blade has reached desired position.
To do so will use excess current and
overheat components.
ON/OFF
Switch
(Emergency
Stop)
Power
Indicator
Light (red)
2. Move the ON/OFF switch on the side of
the control to the "ON" position. The power
indicator light glows red, indicating the
control is ON. The power indicator light glows
red whenever the control and the vehicle
ignition switch are both ON and the electrical
connections to the snowplow are completed.
The ON/OFF switch operates as an
emergency stop if required.
To Next Page
Loading...