Lit. No. 44224, Rev. 14 47 August 15, 2011
Function Description of Operation
L
(Angle Left)
Move the control lever straight to the left
to angle the blade left. Function times out
after 9.6 seconds.
R
(Angle
Right)
Move the control lever straight to the right
to angle the blade right. Function times
out after 9.6 seconds.
NOTE: If control function times out before
desired blade movement is complete, release
the lever to the center position, then move
back into the desired function.
SECURITY GUARD™ System (1, 2, 3, 4)
Moving the control lever from the center position
toward any of the four digits on the face of the
control body will operate the SECURITY GUARD
system. See SECURITY GUARD System in this
section for more information.
OPERATING YOUR SNOWPLOW
To Next Page
Loading...