Lit. No. 44224, Rev. 14 60 August 15, 2011
Light Flash Indicators
POWER – Red Function
OFF Control is OFF
Solid ON Control is ON and active
Slow Flash No communication
Fast Flash Snowplow is locked—enter
4-digit security code to unlock
FLOAT – Green Function
Solid ON FLOAT function is active
Fast Flash Security code activation in
progress
Additional Notes
• The SECURITY GUARD™ system requires
any control (other than the one with the
assigned 4-digit security code) to enter
the security code before the snowplow
can be activated. Once the security code
is established, the SECURITY GUARD
system recognizes that a control with the
same security code is attached, and does
not require a manual unlock to activate the
snowplow. The system will recognize the
control as "safe" and will automatically unlock.
• The SECURITY GUARD system is only fully
functional with joystick controls PN 49700 &
49900 and hand-held controls PN 29800 &
49800.
• In the event that a snowplow is locked and
cannot be manually unlocked or reset, contact
your Authorized Distributor.
• REMINDER: Record your security code for
future reference.
OPERATING YOUR SNOWPLOW
To Next Page
Loading...