Lit. No. 44224, Rev. 14 85 August 15, 2011
DETACHING SNOWPLOW FROM VEHICLE & STORAGE
NOTE: After each use of the snowplow, reapply
dielectric grease to the electrical plugs to
maintain the protective coating on the terminals.
OFF
ON
Jack (raised)
Jack Lock
Pin Release
Handle (raised)
P
U
SH
Headgear Push Bar
Headlamp Bracket
Pushplate
Jack
(lowered)
Jack Retract
Lever
Jack Lock
Pin Release
Handle (lowered)
Attachment
Arm
Connecting Pin
HT Series™ Attach/Detach Diagram
NOTE: Place electrical plugs in storage
position. The driver-side and center plug
on 3-plug electrical systems are joined for
storage. The passenger-side and 2-plug
systems are equipped with plug covers.
To Next Page
Loading...