Lit. No. 44224, Rev. 14 91 August 15, 2011
2. Make sure all electrical connections including
grounds are clean, tight, free of rust or
corrosion and are coated with dielectric
grease.
3. Check all plugs and seals for hydraulic fl uid
leaks. Repair as necessary.
4. Lubricate all moving parts, especially the
connecting pin extractors, for ease of
operation. Not doing so will make operation
of the mount diffi cult and possibly damage
components.
Apply grease
here.
MAINTENANCE
STORAGE
Your snowplow is designed to be moved into
a storage location using your vehicle and plow
attaching system.
To Next Page
Loading...