Fisher Minute Mount 2 system - Page 96

Lit. No. 44224, Rev. 14 97 August 15, 2011
MAINTENANCE
Hose Routing for
HD, MC and X Series Straight Blades
DS
A
ngle
Hose
PS
Angle
Hose
Lift
Hose
WARNING
Keep 8' clear of the blade drop zone when
it is being raised, lowered or angled. Do
not stand between the vehicle and blade
or directly in front of blade. If the blade
hits you or drops on you, you could be
seriously injured.
illustrations and Hydraulic Hose or Fitting
Replacement instructions.)
8. Manually angle the blade fully in each
direction to remove fl uid from the angle
rams. Do not allow the hose(s) from the
extending ram or the opposite side of the ram
(XtremeV™ blades only) to take fl uid back in.
9. Reconnect the angle ram hoses to the proper
fi ttings. Reinstall all protective hose wraps in
their original positions. (See the following
illustrations for your snowplow type and
Hydraulic Hose or Fitting Replacement
instructions.)