FJDynamics AT2 - Page 4

© FJDynamics. All rights reserved.
FJDynamics AT2 Auto Steer System Hardware Installation Manual
•
The purchased products, services, and features are stipulated by the contract. All or
part of the products, services, and features described in this manual may not be within
the scope of your purchase or usage. Unless otherwise specied in the contract, all
the content in this manual is provided "AS IS" without warranties of any kind, express or
implied.
•
The content of this manual is subject to change due to product upgrades and other
reasons. FJ DYNAMICS INTERNATIONAL LIMITED (FJDynamics) reserves the right to modify
the content of this manual without notice.
•
This manual only provides guidance for use of this product. Every effort has been made
in the preparation of this manual to ensure accuracy of the content, but no information
in this manual constitutes a warranty of any kind, express or implied.
Thank you for purchasing FJDynamics' product. This manual provides detailed hardware
installation guide. If you have any questions, contact the local dealer.
This manual introduces the physical characteristics, installation procedures, and technical
specications of the product as well as the specications and use of the wiring harnesses
and connectors.
Based on the assumption that the users are familiar with the terms and concepts related
to this product, this manual is intended for users who have read the preceding content and
have experience in hardware installation and maintenance.
FJDynamics' ofcial website: www.fjdynamics.com
Preface
Purpose and Intended Users
Technical Support
Disclaimer