FJDynamics AT2 - Air Quality Requirements; Power Supply Requirements; Installation Tools; Unpacking and Inspection

© FJDynamics. All rights reserved. 4
FJDynamics AT2 Auto Steer System Hardware Installation Manual
Unpack and check the items according to the following list.
2.4 Unpacking and Inspection
12 Electric drill / 1 Work with sleeves.
13 Tweezers / 1 Install the SIM card.
14 Ejector pin / 1 Install the SIM card.
15 Box cutter / 1 Unpack.
16 Scissors / 1 Cut cable ties.
17 Tape measure 5 m 1 Measure vehicle parameters.
18 Open-end
wrench
9/10 1 Spare part.
19 Extra-long box-
end wrench
11/13/14 1 Spare part.
No. Assembly Component Qty. Remarks
1
Electric
steering
wheel
Steering wheel 1
2 Steering motor 1 12 V/24 V
3
Small self-
sealing bag
Hexagon socket
head cap screw
M4×14
6
Install splined sleeves.
4 Spring washer M4 6
5 Plain washer M4 6
6
Control
terminal
Control terminal 1
7 Control terminal bracket 1
Fix the control terminal.
8 Control terminal mounting base 1
9 Nut 4
10 U-bolt 2