2.3 Interface Menus Introduction
2.3.1 Build
Read the print file from:
The local memory card
The USB stick
1. Tap [Build].
3. File list
Tap to begin printing; tap the picture of the selected file to enter file details.
Page-flip: Tap the left/right arrow.
Long press the file picture or file name, quit out multi-selected interface, you can
select all, copy , delete .
Tap to quit out multi-selected interface.
2. Choose the red path of the print file list.
The Cloud
Back: back to upper interface
Note: The interface layout may change whenever there is an upgrade of firmware.
The functions below are only for demonstration purposes.
1/1 1/1
1/3
11
To Next Page
Loading...
