1.1 - Components Introduce
1.2 - Reference
2.1 - Unpacking
2.2 - Accessories
2.3 - Interface
2.3.1 - Build
2.3.2 - Tools
2.3.2.1 - Network
2.3.2.2 - Preheat
2.3.2.3 - Setting
2.3.2.4 - About
2.3.3 - Filament
2.4 - Print
2.4.1 - Load Filament
2.4.2 - Model File Transfer
2.4.3 - Print
2.4.3.1 - FlashCloud Print
2.4.3.2 - PolarColoud Print
2.4.4 - Model Remove
2.4.5 - Replace Filament
2.5 - The Guide of Using Camera
2.5.1 - FlashCloud Camera Use
2.5.2 - PolarCloud Camera Use
2.5.3 - The Switching Can Be Controlled Through the Cloud
2.5.4 - Error Handling
06
07
08
10
11
11
13
13
16
17
21
22
23
23
25
30
30
32
36
37
38
39
41
43
45
Chapter 1: Adventurer 3 Pro 2
Chapter 2: Operating
Chapter 3: Q&A
Chapter 4: Supports and Service
06
08
46
49
Content
Preface
Notice
Terms
To Next Page
Loading...
