1. Tap [Build], choose the file path: Printer internal memory, USB stick, Cloud.
2. Choose the model file, tap on its right to start printing; or tap model picture or model
name to enter detail page, tap to start printing.
3. Extruder will heat up automatically, when heating finishes, the printer will start to build
the model. After printing completed, printer will sound a beep and pop out a notice on
the touch screen.
2.4.3 Print
Build
6.62 GB
Not Available
No Job
Ship-PLA.gx
Ship-PLA.gx
1/1
Build completed
OK
20mm_Box-P...
20mm_Box-PLA.gx
Time Remaining
h min
0 h 10 min
0.70 M
20mm_Box-
PLA.gx
1/1
Tools
Filament
29
To Next Page
Loading...
