EQUIPMENT ENVIRONMENT REQUIREMENTS
EQUIPMENT PLACEMENT REQUIREMENTS
COMPATIBLE FILAMENT REQUIREMENTS
FILAMENT STORAGE REQUIREMENTS
LEGAL STATEMENT
The equipment must be placed in a dry and well-ventilated environment.
A distance of at least 20cm must be reserved around the front, back, left and right
sides of the equipment. Recommended storage temperature: 0-40°C
When using this equipment, it's recommended to use Flashforge's filaments.
If non-Flashforge filaments are used, there will be certain differences in material
properties, and print parameters may need adjustments.
Please store filaments in a dry and dust-free environment after unpacking. It is
recommended to use the matching filament dry box for storage.
Room temperature: 15-30℃; Humidity: 20-70RH%
Users are not authorized to make any modifications to this User Guide.
Flashforge shall not be held responsible for any safety incidents resulting from the
disassembly or modification of the equipment by the customer. No one is allowed
to modify or translate this Guide without Flashforge's permission. This Guide is
protected by copyright, and Flashforge reserves the right of the final interpretation
of this Guide.
First Edition (October 2024)
Copyright © 2024 Zhejiang Flashforge 3D Technology Co., Ltd. All Rights Reserved.
03
To Next Page
Loading...
