Flashforge Creator 3 Pro - FlashPrint Installation; First Printing; File Transfer: Wi-Fi Transfer

Method 1: Find the FlashPrint software installation package in the USB disk and select the corresponding system
version for installation.
Method 2: Download the latest slicing software from the official Chinese website (www.sz3dp.com) or the official
English website (www.flashforge.com) for installation.
3D printing process:
Get the model file - Slice with the slicing software - Transfer the file to the printer for printing.
Import the STL or OBJ file to FlashPrint for slicing, select Creator 3 Pro to connect to the machine (or by entering the IP
address or by auto-scanning, while the IP address can be viewed in Device [About]). Then it will be sent directly to the
printer after slicing is completed.



14