Flashforge Finder 2.0 - Page 88

Finder2.0 User Guide |
www.flashforge.com
0086-0579-82273989
78
Not all the models are in the right positions after being loaded. Therefore, you need to
place it in an appropriate position for better print quality. Such as the models below,
you need to put one of the surfaces onto the platform.(Please refer to 5.1.12-
⑦
Surface
to Platform)
①
Improper Proper
8-12
②
Improper Proper
8-13
③
Improper Proper
8-14