Flashforge Finder - Page 57

Finder User Guide | www.ff3dp.com
57
Step 3
：
Reboot you Finder and wait for 4-5 seconds, then you can see the update
process bar. When the update finishes, it will go back to the main interface.
Step 4：Tap[Tools]--[About] to check] to check whether the updated version is right.
③ On Board Preferences
When the computer and printer are in connection, click [Tools]--[On Board
Preferences], you can check the printer name.
④ Machine information
When the computer and printer are in connection state, click [Tools]--[Machine
information], you can check the machine type, machine name and firmware etc.
5.1.11 Help Menus
① Help Contents：Click [Help]--[Help Contents], you can read the help contents.
② Check for Updates： Click [Help]--[Check for Update] to detect the available
updates online.
③ About FlashPrint： Click [Help]--[About Flashprint], the software information
box will pop up. The contents include the current software version and copyright
information.