Flashforge Finder - Chapter 6: Basic Printing; 6.1 Generate a Gcode

Finder User Guide | www.ff3dp.com
58
Chapter 6: Basic Printing
This chapter will provide a step-by-step guide on turning a 3D model into a physical
reality. Before proceeding, it is recommended that you go over prior chapters on
loading/unloading filament, leveling the build platform, and the functions and
capabilities of FlashPrint.
6.1 Generate a Gcode
(6-1)Double-click the icon of Flashprint to start the software.
6-1
(6-2)Click[Print]--[Machine Type] to select Flashforge Finder
6-2
(6-3)Click the [Load] icon to load a .stl model file and the object will display on the
build area.
34