Flashforge Guider II - Notice; Work Environment Safety; Electrical Safety; Personal Safety

GuiderⅡ User Guide | www.flashforge.com
5
Notice
Safety Notice
! Notices: Read all the instructions in the manual and familiarize yourself with the
FlashForge GuiderⅡ User Guide before setting-up and using. Failure to comply with
the warning and instructions may result in individual injury, fire, equipment damage or
property damage.
PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE
BELOW ALL THE TIME.
· Wor k Envir onment Safety
① Keep your work place tidy.
② Do not operate GuiderⅡ in the presence of flammable liquids, gases or dust.
③ Keep Guider Ⅱ out of children and untrained people’ reach.
· Electr ical Safety
① Always use the Guider Ⅱ with a properly grounded outlet. Do not refit Guider Ⅱ
plug.
② Do not use Guider Ⅱ in damp or wet locations. Do not expose Guider Ⅱ to
burning sun.
③ In case of device damage, please use the power supply provided by FlashForge.
④ Avoid using the device during an thunderstorm.
⑤ In case of uncertain accident, please unplug the device if you do not use it for long.
·Personal Safety
① Do not touch the nozzle and build plate during printing.