Flashforge Guider II - Chapter 7: Basic Printing; Generate a Gcode

GuiderⅡ User Guide | www.flashforge.com
56
Chapter 7: Basic Printing
This chapter will provide a step-by-step guide on turning a 3D model into a physical
reality. Before proceeding, it is recommended that you’d better go over prior chapters
on loading/unloading filament, leveling the build platform, and the functions and
capabilities of FlashPrint.
7.1 Gener ate a Gcode
(7-1)Double-click the icon of FlashPrint to start the software.
7-1
(7-2)Click [Print]--[Machine Type] to select FlashForge GuiderⅡ
7-2
(7-3)Click the [Load] icon to load a .stl model file and the object will display on the
build area.
7-3
（7-4）Click [Edit]--[Sur face to Platfor m] to make your model perfectly positioned
34