10. Close the build chamber door gently by hand.
11. Clean waste. Open the waste chamber, remove and clean
the wastes box, Then put it back.
9. Install build plate: please follow the hints in the interface
to install the build plate and tight the pressing nut counter-
clockwise.
8. Tap print icon and start printing.
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26
27 28 29 30 31
32 33 34 35
36 37 38 39 40 41 42 43
44 45 46 47 48 49 50 51
52 53 54
55 56 57 58 59 60 61
62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77
78 79 80 81 82 83 84 85
86 87 88 89 90 91 92 93
94 95 96 97 98 99 100 101
102 103
To Next Page
Loading...
