Fleck 9500 - Job Specification Sheet; 9500 CONTROL VALVE SPECIFICATIONS

MODEL 9500 ECONOMINDER

Job Specification Sheet
Printed in U.S.A.
• JOB NO. __________________________________________________________
• MODEL NO. _______________________________________________________
• WATER TEST______________________________________________________
• CAPACITY PER UNIT ____________MAX. ___________PER REGENERATION
• MINERAL TANK SIZE DIA.________HEIGHT_________
• BRINE TANK SIZE &
SALT SETTING PER REGENERATION: _________________________________
Page 2
* 9500 CONTROL VALVE SPECIFICATIONS
1) Type of Timer
A) 82 minute available regeneration time, 1/15 RPM
B) 164 minute available regeneration time, 1/30 RPM
2) Type of Meter
A) Std. range 625 to 10,625 gal. setting
B) Ext. range 3,125 to 53,125 gal. setting
3) Meter Gallon Setting ____________________________ gal. (see pages 6 & 7)
4) Regeneration Program Setting (see page 5)
A) Backwash _________________________________min.
B) Brine & Slow Rinse _________________________min.
C) Rapid Rinse _______________________________min.
D) Brine Tank Refill ____________________________min.
5) Drain Line Flow Control__________________________gpm
6) Brine Refill Rate________________________________gpm
7) Injector Size __________________________________