FLIR Ariel CM-3102 - Network Settings

Appendix
December 12, 2018
Ariel CM-3102 User and Installation Guide
99
Network Settings
The following are the network protocols and ports used by the camera:
Protocol
Port
Usage
FTP
21
Uploading files to the FTP server
HTTP
80
Sending commands, requests, replies and notifications
HTTPS
443
Using the secure socket protocols SSL/TLS over
HTTP. HTTPS must be enabled if your network
uses SNMPv3.
Multicast
Streaming
As defined in
the units
Video/streaming (multicast). Uses the ONVIF address defined by the
Video Management System
Multicast UDP
9766
Unit self-publishing. Uses IP address 224.9.9.9
NTP
123
Time synchronization with a network time server using SNTP
RTSP
554
RTP session setup
RTP
2000 to
65535
Multimedia streaming
SNMP
161
IP management system
SNMP Trap port
162
Sending alarm event and exception messages to the surveillance
center