FLIR Ariel CM-3102 - Figure 40: Firmware Screen; Figure 41: Rebooting Complete Dialog Box

Accessing the CM-3102 via a Web Browser
December 12, 2018
Ariel CM-3102 User and Installation Guide
41
6.3.1.2.3 Firmware
The Firmware screen displays and is used to update the system firmware, and to display the hardware
version, product name (model number), product serial number, and product MAC address. To access
the Firmware screen, select Basic Configuration > Firmware.
Figure 40: Firmware Screen
To update system firmware
Click Browse to locate the firmware file.
Select the file. The file name is displayed (for example, ArielFHD_20160308.tar).
Note:
If you are upgrading from the GA firmware version 01.05.32 or 01.05.32.5 to version
01,05.37.4 or higher, you must update the .bin file from DNA version 2.1.2.4 or higher.
Click Upgrade. The upgrade process takes about three minutes. After the firmware has
upgraded successfully, the camera reboots. The following dialog box is displayed:
Figure 41: Rebooting Complete Dialog Box
Click OK. The Live screen opens.
When the Internet Explorer dialog box asks you to close the window, click Yes. The window
closes.
Open a new window and enter the camera’s URL. The Login window opens. See Figure 14:
Login Window.
Enter your user credentials and log into the camera. The new firmware version is displayed in
the Firmware Version text box.
6.3.1.2.4 Basic Operations
The Basic Operations screen is used for the following functions:
 Setting the TV format
 Importing settings from another unit
 Exporting settings to another unit
 Rebooting the camera