FLIR Ariel CM-3102 - Figure 54: Network > FTP Screen; Figure 55: Network > RTSP Screen

Accessing the CM-3102 via a Web Browser
December 12, 2018
Ariel CM-3102 User and Installation Guide
51
To access the FTP server
From the Enable drop-down list, select ON. The default is OFF.
Figure 54: Network > FTP Screen
Click Save.
Note:
Even when set to Off, recordings and snapshots will still be stored in the camera’s microSD
card. However, the user will not be able to remotely access them via FTP.
6.3.1.4.3 RTSP
The RTSP screen is used for transmitting the encoded video stream. The RTSP protocol is used for
establishing the connection and controlling the streaming data between the camera and a device over
the web. Each stream can be sent by unicast to one device or broadcasted by multicast to multiple
devices. Unicast requires larger network bandwidth and more server resources, but is more stable than
multicast, which requires more settings.
Figure 55: Network > RTSP Screen
To configure basic settings
In the Login ID text box, enter your Login ID number.
Note:
It is recommended, but not necessary, to enable authentication in order to use RTSP.