FLIR Ariel CM-3102 - Figure 10: Spacer Attached to Camera Base; Figure 11: Align Spacer

Installing and Connecting the Camera
20
Ariel CM-3102 User and Installation Guide
December 12, 2018
If you are mounting the camera on a solid surface, attach the included spacer to the base of the
camera.
Figure 10: Spacer Attached to Camera Base
Align the holes of the spacer with the holes in the base of the camera. Use the appropriate
mounting hardware for your surface.
Figure 11: Align Spacer
Note:
CM-3102-01-I units require the spacer when using the CM-RCSD-G2 recessed mount. Use
the mechanical screws included with the spacer for proper mounting.