Run the dna.exe file by clicking the icon. The DNA application opens and the device is
displayed in the DNA Discovery window. See Figure 13: DNA Discovery Window (page 22).
Select the unit by right-clicking it. The DNA - Assign IP window is displayed.
Figure 27: DNA Assign IP - Use DHCP Screen
Uncheck Use DHCP.
Enter the unit’s default IP address (192.168.0.250), Subnet mask, and Gateway IP address in
the respective field.
Click Update. The unit reboots with the new settings.
Click on the unit in DNA’s Discover List. The camera’s Login window opens.
See Figure 14: Login Window (page 23).
Enter the default User Name (Admin) and Password (1234).
Click Login. The camera’s web interface opens. See Figure 15: Web Interface (page 23).
Click the on-screen message to install the Ariel Player plug-in. The Ariel Player Plug-in message
is displayed. See Figure 16: Download Ariel Player Plug-in Information Bar (page 23).
5.5 Resetting the Camera
The camera includes a reset button, which is located on the camera’s printed circuit board (PCB), along
with the camera’s microSD card drive.
Figure 28: Camera Reset/MicroSD Panel
To Next Page
Loading...
