In the Basic Settings section, configure the following settings for OSD-1 and OSD-2:
Enable – From the drop-down list, select one of the following:
Date – Enables you to enter the date to display.
Text – Enables you to enter the time to display.
OFF – Disables the OSD function. This is the default setting.
Background Color – From the drop-down list, select Black or Transparent (default setting).
Text Color – From the drop-down list, select Black or White (default setting).
Location X – Move the slider from 1 to 10 to set the location on the screen for the OSD.
The default setting is 1.
Location Y – Move the slider from 1 to 10 to set the location on the screen for the OSD.
The default setting is 1.
In the Event section, configure the following settings in case an event occurs:
Background Color – From the drop-down list, select Black or Transparent (default setting).
Text Color – From the drop-down list, select Black or White (default setting).
Location X – Move the slider from 1 to 10 to set the location on the screen for the OSD.
The default setting is 1.
Location Y – Move the slider from 1 to 10 to set the location on the screen for the OSD.
The default setting is 1.
Click Save when finished.
User Accounts
The User Accounts screen is used for creating, modifying, and deleting accounts; creating or modifying
credentials; and for assigning user access level (Administrator, Operator, and User). It is possible to
create up to 10 users, in addition to the default Administrator, which cannot be deleted. There can be
multiple users of all types.
Figure 45: User Accounts-Account Setting Screen
Note:
1. User Name and Password can include up to 16 characters, including '0' to '9', 'a' to 'z', 'A' to 'Z',
'.', '-', '+', '_' and '@'.
2. The user name and password are case-sensitive.
To Next Page
Loading...
