FLIR Ariel CM-3102 - Accessing the CM-3102 Via a Web Browser

Accessing the CM-3102 via a Web Browser
December 12, 2018
Ariel CM-3102 User and Installation Guide
31
Accessing the CM-3102 via a Web
Browser
The CM-3102 includes a web interface that enables it to be configured and operated from a web browser
(32-bit version of Internet Explorer 10 and above).
To access the unit via the web browser
Open Internet Explorer.
Enter the unit’s IP address in the browser’s address bar.
Note:
1. When the HTTPS feature is enabled, by default the system uses HTTPS login mode
(e.g., https://192.168.0.250) when you enter the IP address.
2. If you want to use HTTP mode to log into the device, enter http://IP address
(e.g., http:// 192.168.0.250).
Press the ENTER key on your PC keyboard. The unit’s Login window is displayed.
See Figure 14: Login Window (page 23).
Enter the user name (default: Admin) and password (default: 1234) to log into the system. The
unit’s web interface opens. See Figure 15: Web Interface (page 23).
Note:
The user name and password are case-sensitive.
If you are using the system for the first time or you have uploaded a new firmware version, click
the message displayed on the screen to download to allow the MediaPlayer Control
Module.exe plug-in.
Click Allow. The Windows Installer opens and the Ariel Player Wizard dialog box is displayed.
Follow instructions in section 5.4.2, Configuring the Unit’s Initial IP Address.